USB 3.0 external dvd burner
2018-12-21 11:03:36
Nowadays, more and more data is burned into optical disks, which has become an important choice for many people to store large amounts of information. In order to facilitate burning operation, the external burning machine is gradually being favored by burning users; This is not the author in the Spring Festival before, also went to the market to buy an external burner, after a few days of holiday efforts, will burn data into CD, has been an important choice for many people to store large capacity information. In order to facilitate burning operation, the external burning machine is gradually being favored by burning users; This is not the author before the Spring Festival, also went to the market bought an external type burners, after a few days vacation to ponder and found that the use of external burner method with a built-in CD burner was a different method of use, now, the author has summed up the latest some external contribution is a use of the burner, to help you with a good external burner.
External connection, can not be ignored
Now the external burner interface is almost all USB port, because the interface supports hot plug function, so many burning users think that the external burner connection is simple to hardly worth mentioning, as long as the corresponding port in the computer plug to solve the problem; Little do they know that the stability of the port is directly related to the working stability of the burn CD drive, if you ignore its connection, it is easy to cause the phenomenon of scrap CD burn. In order to effectively avoid this phenomenon, we need to pay attention to the following links:
1. When connecting the external burner with the computer, try to use the USB connection cable randomly equipped with the external burner to prevent the USB interface standard of the connecting cable from being inconsistent with the USB interface standard on the computer motherboard, so as to reduce the stability of data transmission;
2. Insert the USB connection cable of the external burner into the USB interface integrated on the computer motherboard as far as possible, instead of randomly inserting into the USB interface in front of the computer case, so as to improve the working stability of the USB interface;
3. less as far as possible the use of USB extension cable to connect the external burner and computer, this is because the original cable, USB extension cord and the external CD writer on the transmission performance or may not be able to keep the match on the interface standard, and the interface between them in mutual connection, the phenomenon that tend to appear too loose or too tight, if the interface connection too loose, easy to connect weak phenomenon, this phenomenon will directly lead to burn a disc of scrapped. If the interface between them is too tight, it is easy to cause difficulties in connection, and even can damage the USB interface; And after using USB extension cord, the transmission speed of burning data may also be
It will be affected to some extent.
Drive power, must match
In the process of long-term contact with the external burner, we may often encounter the optical drive box and the burner drive power does not match the problem, if this problem occurs, will directly lead to the burning disk scrap. If, for example, run the power rating of the burners for 25 w, then match the burner of the driving power of cd-rom box must ensure around 30 w, otherwise burners underload occur in very easy to burn a CD, the consequences of this phenomenon is often lead to burn a good CD error-prone, even scrapped directly. In order to effectively avoid the occurrence of the above phenomenon, we in the purchase of external burning machine, it is best to choose the drive power of small products.
Change your mind and do more than one thing at a time
In order to ensure stability and safety of burners, many burn user will think in the process of the burn a CD, run less as far as possible to connect other devices in the computer after all burners burn CD will take up much system resources, if running at the same time other external devices, it is easy to cause power is not enough or not enough system resources, which affects the working stability of computer system. Indeed, this understanding, we must strictly abide by a few years ago, because the computer use of CPU configuration at best only about 1 g, memory is also under 128 m, in this low configuration of computer systems, recorders, of course, can't even get the resources from the system, and then burn security technology is not mature, so at the same time run multiple external devices is a "whole" burner to the dead.
Change your mind and do more than one thing at a time
In order to ensure stability and safety of burners, many burn user will think in the process of the burn a CD, run less as far as possible to connect other devices in the computer after all burners burn CD will take up much system resources, if running at the same time other external devices, it is easy to cause power is not enough or not enough system resources, which affects the working stability of computer system. Indeed, this understanding, we must strictly abide by a few years ago, because the computer use of CPU configuration at best only about 1 g, memory is also under 128 m, in this low configuration of computer systems, recorders, of course, can't even get the resources from the system, and then burn security technology is not mature, so at the same time run multiple external devices is a "whole" burner to the dead.
But with the burning security technology is becoming more and more mature, the possibility of burning disc being damaged by accident is gradually decreasing. Plus external burner using the power of the independent power supply, no grab the power of the computer and other external equipment resources, and the computer is based on the configuration of the CPU is more than 2 g, memory is 512 m above, so high grade configuration fully able to cope with a variety of external devices running together, so can greatly improve the efficiency of the use of computers.
End burn, remove correctly
Many people always think the external burner using USB interface support hot plug function, so the complete burn operation needs to move except burn unit, the user is always carelessly will connect to the computer USB cable in the pull down, little imagine this easy to external burner or the computer's USB port damage, cause the next time we need to burn when external recorder doesn't work properly. Before the need to move except buy burners, must ensure the work of the burner can't first, use the mouse to double-click system directly after the task bar at the lower right of the "safely remove hardware" icon, list of hardware devices in the following pop-up window, choose and buy the recorder correspond to the name of the option, and then click the "stop" button, so that the system will automatically prompt except we can safely remove buy to burn a cd-rom; Next, we can unplug the USB signal cable inserted into the computer, pull out the power plug from the power socket, and finally pack the external burner.
External connection, can not be ignored
Now the external burner interface is almost all USB port, because the interface supports hot plug function, so many burning users think that the external burner connection is simple to hardly worth mentioning, as long as the corresponding port in the computer plug to solve the problem; Little do they know that the stability of the port is directly related to the working stability of the burn CD drive, if you ignore its connection, it is easy to cause the phenomenon of scrap CD burn. In order to effectively avoid this phenomenon, we need to pay attention to the following links:
1. When connecting the external burner with the computer, try to use the USB connection cable randomly equipped with the external burner to prevent the USB interface standard of the connecting cable from being inconsistent with the USB interface standard on the computer motherboard, so as to reduce the stability of data transmission;
2. Insert the USB connection cable of the external burner into the USB interface integrated on the computer motherboard as far as possible, instead of randomly inserting into the USB interface in front of the computer case, so as to improve the working stability of the USB interface;
3. less as far as possible the use of USB extension cable to connect the external burner and computer, this is because the original cable, USB extension cord and the external CD writer on the transmission performance or may not be able to keep the match on the interface standard, and the interface between them in mutual connection, the phenomenon that tend to appear too loose or too tight, if the interface connection too loose, easy to connect weak phenomenon, this phenomenon will directly lead to burn a disc of scrapped. If the interface between them is too tight, it is easy to cause difficulties in connection, and even can damage the USB interface; And after using USB extension cord, the transmission speed of burning data may also be
It will be affected to some extent.
Drive power, must match
In the process of long-term contact with the external burner, we may often encounter the optical drive box and the burner drive power does not match the problem, if this problem occurs, will directly lead to the burning disk scrap. If, for example, run the power rating of the burners for 25 w, then match the burner of the driving power of cd-rom box must ensure around 30 w, otherwise burners underload occur in very easy to burn a CD, the consequences of this phenomenon is often lead to burn a good CD error-prone, even scrapped directly. In order to effectively avoid the occurrence of the above phenomenon, we in the purchase of external burning machine, it is best to choose the drive power of small products.
Change your mind and do more than one thing at a time
In order to ensure stability and safety of burners, many burn user will think in the process of the burn a CD, run less as far as possible to connect other devices in the computer after all burners burn CD will take up much system resources, if running at the same time other external devices, it is easy to cause power is not enough or not enough system resources, which affects the working stability of computer system. Indeed, this understanding, we must strictly abide by a few years ago, because the computer use of CPU configuration at best only about 1 g, memory is also under 128 m, in this low configuration of computer systems, recorders, of course, can't even get the resources from the system, and then burn security technology is not mature, so at the same time run multiple external devices is a "whole" burner to the dead.
Change your mind and do more than one thing at a time
In order to ensure stability and safety of burners, many burn user will think in the process of the burn a CD, run less as far as possible to connect other devices in the computer after all burners burn CD will take up much system resources, if running at the same time other external devices, it is easy to cause power is not enough or not enough system resources, which affects the working stability of computer system. Indeed, this understanding, we must strictly abide by a few years ago, because the computer use of CPU configuration at best only about 1 g, memory is also under 128 m, in this low configuration of computer systems, recorders, of course, can't even get the resources from the system, and then burn security technology is not mature, so at the same time run multiple external devices is a "whole" burner to the dead.
But with the burning security technology is becoming more and more mature, the possibility of burning disc being damaged by accident is gradually decreasing. Plus external burner using the power of the independent power supply, no grab the power of the computer and other external equipment resources, and the computer is based on the configuration of the CPU is more than 2 g, memory is 512 m above, so high grade configuration fully able to cope with a variety of external devices running together, so can greatly improve the efficiency of the use of computers.
End burn, remove correctly
Many people always think the external burner using USB interface support hot plug function, so the complete burn operation needs to move except burn unit, the user is always carelessly will connect to the computer USB cable in the pull down, little imagine this easy to external burner or the computer's USB port damage, cause the next time we need to burn when external recorder doesn't work properly. Before the need to move except buy burners, must ensure the work of the burner can't first, use the mouse to double-click system directly after the task bar at the lower right of the "safely remove hardware" icon, list of hardware devices in the following pop-up window, choose and buy the recorder correspond to the name of the option, and then click the "stop" button, so that the system will automatically prompt except we can safely remove buy to burn a cd-rom; Next, we can unplug the USB signal cable inserted into the computer, pull out the power plug from the power socket, and finally pack the external burner.